WIPER / WASHER  REAR WIPER MOTOR  INSTALLATION  

2.052,0.698 1.708,1.052 1.708,1.052 1.323,0.677 true 1.656,1.073 1.969,1.271 0.313,0.198 10 *1

*1

MP Grease

Apply MP grease to the entire surface of the No. 1 rear wiper link pivot washer lip.

HINT:

Make sure that the hole does not get clogged with grease and the grooves in the No. 1 rear wiper link pivot washer are filled with grease.

0.75,0.917 0.75,0.75 0.75,0.75 0.917,0.75 false 0.958,0.677 1.271,0.875 0.313,0.198 10 *1 0.198,0.792 0.51,0.99 0.313,0.198 10 *a

*1	Position Mark
*a	Upward

Install the No. 1 rear wiper link pivot washer.

HINT:

Install the No. 1 rear wiper link pivot washer with its position mark facing up.

1.917,3.667 2.667,3.667 true 1.75,1.25 1.75,0.75 1.75,0.75 2.667,0.75 true 2.708,0.667 3.021,0.865 0.313,0.198 10 *1 2.719,3.594 3.031,3.792 0.313,0.198 10 *2

*1	Wiper Arm Serration
*2	Wiper Pivot Serration

When reusing the rear wiper arm and blade assembly:

1.667,1.75 0.917,1.75 0.917,1.75 0.917,1.063 false 1.708,1.677 2.021,1.875 0.313,0.198 10 false *1 0.563,1.146 0.719,1.344 0.156,0.198 10 false a

*1	Ceramic Line

Install the rear wiper arm and blade assembly with the nut to the position shown in the illustration.

Torque:

5.5 N*m (56 kgf*cm, 49 in.*lbf)

HINT:

·

Hold the wiper arm by hand while tightening the nut.

·

Install the rear wiper arm and blade assembly so that the rear wiper blade is aligned with the defogger line.

0.781,1.01 1.24,1.208 0.458,0.198 10 (A) 2.365,0.146 2.823,0.344 0.458,0.198 10 (B)

Attach the 2 claws (B) to the rear wiper arm and blade assembly.